Personnel Qualification; Special Hazards - WIKA CPG500 Betriebsanleitung

2 Safety
2.2

Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by
skilled personnel who have the qualifications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge of
country-specific regulations, current standards and directives, are capable of carrying out the work
described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3

Special hazards

WARNING!
Use the CPG500 digital pressure gauge only with safe gases and liquids per
■
directive 67/548/EEC.
If it is obvious that safe operation of the instrument is no longer possible, the
■
instrument must be put out of operation and marked in order to secure it against
inadvertent use.
The measurement signal of the reference (or test sample) can be influenced by
■
massive electromagnetic irradiation and/or the indication of the signal could be
completely absent.
If the digital pressure gauge CPG500 is used in applications with oil as a pressure
■
medium, make sure it will not be used with flammable material or gases directly
afterwards since it can lead to dangerous explosions and danger to personnel
and machinery.
Digital pressure gauges should only be fitted or remored when the system is free
■
from pressure.
Observe the working conditions in accordance with chapter "3. Specifications".
■
Always operate the pressure indicator within its overload limits.
■
WIKA Operating Instruction, Model CPG500
GB
7