Resetting The Zero Point Correction; Automatic Power Off; Changing The Unit - WIKA CPG500 Betriebsanleitung

6 Commissioning, operation

6.2.9 Resetting the zero point correction

Turn off the device. Zero point correction is no longer active when the device is turned off
and on again.

6.2.10 Automatic power off

Press for 2 seconds.
Depending on the device configuration, two different displays are possible:
PO On
Press
is activated after 5 minutes.
The settings Auto Power Off or Continuous operations remain stored and are active
when the device is turned off and on again.

6.2.11 Changing the unit

Press for 2 seconds.
or
Press
Press once (briefly)
The next unit is indicated
Confirm unit selection.
WIKA Operating Instruction, Model CPG500
Auto Power Off
Auto Power Off
Continuous operations
PO OFF
Press The device must
be turned off manually.
GB
15