Heat Settings - Pkm In5-Fzf Bedienungsanleitung

 In the timing state, if you press the heating area selection button to select
the hob, the current display time is the timing of the currently selected hob.
 The display time shows one of the four timers, the decimal point of the single
digit display of the corresponding zone will flash. It means the time currently
displayed is the timing time of the area.
 If all of the decimal point of single digit does not flash, it means that the
current two digits display is the time of the timing reminder.
Default working time
Auto shutdown is the safety protection function of induction cooker. This
occurs whenever you forget to switch off a cooking zone. The default shutdown
times as below table:
Power level
Default working
timer (hour)
The display will stop heating immediately when cookers are moved away,
and auto turn off after 2 minutes.
If there are multiple heating areas heating at the same time, the default
timing of the whole machine is the one with the longest default timing time.

Heat Settings

The settings below are guidelines only. The exact setting will depend on factors
including your cookware and the amount you are cooking. Experiment with the
hob to find the settings that best suit you.
Heat
setting
1 - 2
3 - 4
5 - 6
7 - 8
9
1 2
8 4
Suitability
delicate warming for small amounts of food
•
melting chocolate, butter, and foods that burn
•
quickly
gentle simmering
•
slow warming
•
reheating
•
rapid simmering
•
cooking rice
•
pancakes
•
sautéing
•
cooking pasta
•
stir-frying
•
searing
•
bringing soup to the boil
•
boiling water
•
3 4 5
4 4 2
60
6 7 8
2 2 2
9
2