Operation Instructions
Turn on
Press "ON/OFF" button to switch
on or switch off the hob and you
will hear a "beep" after touch. All
display will show "-" or "- -"
respectively. If without any
operation after switch on the hob in
60 seconds, the hob will be turned
off automatically.
Use e a suitable pot/pan on the
heating area.
Make sure the bottom of the
pan/pot and the surface of the
heating area are clean and dry
When touch the heating zone
selection button, display nearby will
flash "0".
The display will stop flashing
within 5 seconds after no
operation, and show the power
level.
Control the power by slider touch
control.
When the heating power of any
heating zone is "0", the cooker
will automatically enter the
standby state after 1 minute of
no operation.
You can change the power at
any time during cooking.