Pause
Press the "pause" button in the working state, the cooker will enter the
pause state, and the display will show" "和"
pause function, press the "pause" button again, and the cooker will return to its
previous working state.
If there is no operation within 10 minutes in the pause state, the cooker will
automatically turn off.
Keep warm
Select the heating area, press the "keep warm" button, the heating area will
enter the heat preservation cooking mode, and the display will show "
induction cooker will heat with low power to maintain the proper temperature of
the pot.
The power is not adjustable under this function.
Timer
You can use timer function by below two ways:
d) You can use it as a minute reminder. In this case, the timer will not close any
cooking area at the set time.
e) You can also set it to turn off one or more heating zones after the setting time
In working state, select the heating zone
which you want to set timer . (For
example:3#heating zone)
Press "+" to increase the time, display will
show and flash "10".
" respectively. To cancel the
58
" ,the