Electric Shock - Pkm In5-Fzf Bedienungsanleitung

9. Metal-made items such as knives, forks, spoons and pan lids should not be put
on the appliance, because they may become hot.
10. This appliance complies with the current European safety legislation. We do
wish to emphasize that this compliance does not negate the fact that the
surfaces of the appliance will become hot while operating and will retain and
emit heat even if it has stopped operating.
NOTICE!
When you move the appliance, hold it at its base and lift it carefully. Keep the
1.
appliance in an upright position.
The appliance must be transported and installed by at least two persons.
2.
When you unpack the appliance, you should take note of the position of its
3.
components in case you have to repack and transport it at a later point of time.
Do not put any heavy items on the hob.
4.
Only use cookware which is suitable to be used on ceramic glass; otherwise you
5.
will damage the appliance.
Do not operate the appliance unless all components are installed properly.
6.
The air vents of the appliance or its built-in structure (if the appliance is suitable
7.
for being built-in) must be completely open, unblocked and free of any kind of
dirt.
The rating plate must not be removed or made illegible, otherwise all terms of
8.
the warranty become invalid!
SAVE THESE INSTRUCTIONS.
 The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
DANGER!
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier. Do not
carry out the installation yourself. RISK OF ELECTRIC SHOCK!
DANGER!
professional. Do not modify the energy supply. The connection must be carried
out in accordance with the current local and legal regulations. RISK OF

ELECTRIC SHOCK!

WARNING! The safety distance between the hob and a wall cupboard
above should be at least 450 mm.
The appliance must be connected to the mains by a
All electrical work must be carried out by a qualified
43