Rockinger ROE 57065 Montage- Und Betriebsanleitung Seite 37

ROëDrawbar eyes
torQue
Screw-in drawbar eye
RO Item no.
ROE 57318
ROE 57321
ROE 57294
ROE 57295
* Setpoint (friction cofficient of washer µ = 0,14) tighten
the screw connection with a torque spanner according
to DIN EN ISO 6789, class A or B
Secure the crown nut with a split pin [9]

Bend the split pin's ends [9] to prevent

the split pin falling out
note
If the split pin cannot be inserted, tighten
further until the next split pin cover is reached.
Attention!
ensure that the minimum torque is reached!
Do not turn the crown nut back under any
circumstances!
10.2017
Torque*
min. 500 Nm, max. 1000 Nm
min. 500 Nm, max. 1000 Nm
min. 500 Nm, max. 1000 Nm
min. 750 Nm
[9] Split pin locking
B
A
[10] A Bush D Weld-in bearing
B Srew-in drawbar eye E O-ring large
C O-ring small F Washer small
ROCKINGER
Member of JOST-World
2. Installation
D E H
C F G I
G Washer large
H Crown nut
I Split pin
37
EN