Weld Seam Test - Rockinger Roe 57065 Montage- Und Betriebsanleitung

1. General welding information

1.5 Weld seam test

General
Covered weld seams must be tested to
ensure that they are fault-free before the
subsequent work.
Test procedure
To ensure that the test does not cause da-
mage, use procedures that can detect faults
that are close to the surface and that reach
the surface (e.g. dye penetrant test and
magnetic particle test).
Rejected weld seams
Weld seams that do not meet the quality
requirements must be removed and repla-
ced with fault-free weld seams. The type
and scope of the rework must be defined
together with the welding supervisor respon-
sible (SAP per ISO 14731).
ROCKINGER
30
Member of JOST-World
ROëDrawbar eyes
10.2017