Screw-In Drawbar Eyes; Welding Instructions For Weld-In Bearings - Rockinger Roe 57065 Montage- Und Betriebsanleitung

2. Installation

2.3. Screw-in drawbar eyes

Observe the installation position of the

weld-in bearing when installing
Align the weld-in bearing at an angle to

the drawbar [7]
Observe the minimum weld quality

requirement according to ISO 5817-B
Observe the permissible welding procedure;

table 1.4
Observe the filler metal ‚min. requirement';

table 1.4
Carry out welding in accordance with the

table ‚Welding instructions for weld-in bea-
rings'
Push the drawbar eye through the sleeve

and use the nut to screw tight to the correct
torque

Welding instructions for weld-in bearings

RO Item no.
ROE 53435
ROCKINGER
36
Member of JOST-World
A [mm] B min. [mm]
173 120
[7] Align the weld-in bearing
[8] Welding instructions
ROëDrawbar eyes
10.2017