hanseatic MC-HF662B Gebrauchsanleitung Seite 51

If you do not touch any of the sensors
within 60 seconds the hob will automat-
ically switch off.
2. Press the sensor for the required cooking
zone.
The LED sensor for the required cooking
zone will flash.
3. Stroke your finger over the control sensor
11.
11
Settings begin at level '0'. Next to the
sensor in the desired cooking zone, LEDs
light up, displaying the level which has
been set.
4. When you have selected the desired
setting, touch the sensor on the cooking
zone once again.
The LED on the sensor will no longer
flash, meaning that the desired level has
been set.
Operation
Reduce or increase the heat
supplied to a cooking zone
1. Touch the sensor for the required cooking
zone.
The LED sensor for the required cooking
zone will flash.
2. Stroke your finger over the control sen-
sor 11until the desired setting has been
reached.
3. When you have selected the desired
setting, touch the sensor on the cooking
zone once again.
The LED on the sensor will no longer
flash, meaning that the desired level has
been set.
Switching off individual
cooking zones
1. Touch the cooking zone sensor which you
would like to switch off.
The LED sensor for the required cooking
zone will flash.
2. Stroke your finger over the control sensor
11, until the setting '0'has been reached.
3. Touch the cooking zone sensor once
again.
The LED sensor will no longer flash; the
cooking zone is switched off.
Seite EN-17