Master R-50 Benutzerhandbuch Seite 42

Distance
0.00~999.0
Calories 0~9995
Watt 40~250
Age 10~99
Pulse 60~220
Program Operation
Manual（P1）
Program profile
Select "Manual" using UP OR DOWN KEY then press ENTER KEY. 1
value can be adjusted using UP OR DOWN KEY .Press ENTER KEY to save value & move to next
parameter to be adjusted.
** (If user sets up the target time to workout then the next parameter of Distance can not be
adjusted) Continue through all desired parameters, pressing START/STOP to start workout.
Note: When any One of the workout parameters counts down to zero the console emits a beep sound and
the workout stops automatically. Press START KEY to continue the workout to reach the
unfinished workout goals set.
Pre-programs (P2~P13)
Program profile
2. When time is 1:00-99:00,
It will count down to 0.
1.When display is 0.0,
Distance will count up.
0.00 ±1.0
2.When Distance is 1.0~999.0, it will
count down to 0.
1.When display is 0, Calories will count up.
0.0 ±5 2.When Calories is 5~9995,
it will count down to 0.
User can set watt value only in Watt control
100 ±5 program.
Target HR will be based on Age. When
Heart Rate exceeds Target H.R, the number
30 ±1
of Heart Rate will flash.
Setting Parameters for Target heart rate.
90 ±1
ROLLING
FAT BURN
STEPS
St
parameter, "Time" will flash so
VALLEY
RAMP
OBSTACLE
42
EN