Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions IP camera 43-9582C
GB
Configuration and Set-up
confIguratIon and sEt-up
2.
2.1. Preparation
▸
Connect the IP camera to a 100 Mbit Ethernet LAN
▸
Power supply via Power over Ethernet (PoE)
Connection via Ethernet
The IP camera is set up as a DHCP client, i.e. it
obtains its IP address from a DHCP server. Via
Axis Camera Management Software, Behnke
IP video software or in the DHCP server can
be used to find the existing cameras in the
**
network.
The camera's factory default IP address is:
192.168.0.90
2.2. Scope of applications
1. Using the IP camera with a PC and the Behnke
IP video software ▸ Please have a look at the
separate instructions on IP video software
configuration. IP video Software and the cor-
responding manuals can be found here:
www.behnke-online.de/downloads/software
2. Use in video management systems ▸
Follow the instructions for your existing
video management system.
*
Where the camera is used without connection to a Behnke SIP door intercom system, the camera requires class 1 PoE.
Where the camera is used in conjunction with a Behnke SIP intercom station, PoE class 0 is required to operate the SIP
intercom station.
**
Software is available on the AXIS homepage in the section "Learning and Support" (AXIS IP Utility)
***
Documentation for AXIS Vapix can be found on the AXIS homepage in the section "Learning and Support"
30
2.3. User name and password
User name: root
*
Password: Admin
2.4. Access your video feed via a web
browser
Accessing the video feed:
http://<user>:<password>@<ip-addr>/
axis-cgi/mjpg/video.cgi
Additional options can be found withing the
documentation on the VAPIX interface provided
***
by AXIS.
Please note that your web browser needs to
support the corresponding video formats. It may
be necessary to contact your network adminis-
trator.
Attention: Not suitable for permanent video
display.
www.behnke-online.de
Werbung
