System Requirements - Telecom Behnke 43-9582C Anleitung

System requirements

Minimum requirements to install Behnke IP
cameras: PC or Apple Macintosh with functional
Browser (e.g. Microsoft Internet Explorer,
Mozilla Firefox, Apple Safari)
▸ Monitor/graphics card with a resolution of at
least 800 x 600 pixels and true colour display
▸ Set-up network connection
▸ One free Ethernet network port with PoE or
a separate PoE injector.
Minimum system requirements to install
Behnke's IP video software:
PC with Intel® Pentium® IV processor (1.7 GHz)
or AMD Athlon™ processor (1.2 GHz) or better
▸ Network interface controller, configured
▸ Microsoft® Windows 2000® or Windows XP®
operating system or later
▸ 512 MB RAM or more
▸ Monitor/graphics card with a resolution of at
least 800 x 600 pixels and true colour display
The camera type AXIS M4327-P supports
firmware version 11.2.53 or later (if released by
Behnke in conjunction with the Behnke
IP video software). Please observe the approp-
riate settings on page 31 after the reset.
All common rules of network technology must
be observed.
www.behnke-online.de
Instructions IP camera 43-9582C
Maintenance and care
You have chosen high-quality Behnke products
with front panels made from various materials.
Regardless of the material, all front panels
require regular cleaning in sufficiently short
intervals using a cleansing agent appropriate
for the material in question. This prevents early
ageing and patina formation on the surface.
GB
Introduction
23