Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SECURING YOUR BABY USING THE
HARNESS
he harness
2.
Open the harness
buckle, then place the
harness straps to the sides of
the car seat. Put the baby into
the car seat.
4.
Slide buckle tonques together and insert them in the
buckle with an audible sound "click".
36
（
1.
Loosen the harness straps by pressing the release button
and pulling the harness straps as far as you can.
Do not pull the shoulder pads.
（
3.
The correct belt height of the shoulder pads is attained
when the strap disappears into the shell slightly above
the shoulder of the child. Make sure that the harness straps
fit properly over the shoulders of the child.
5.
Pull the straps tight by the harness adjustment strap,
and make sure the tightness is comfortable to your kid.
Caution: Do not twist or interchange the harness straps.
,
TIGHTENING THE HARNESS
）
,
Note:
）
CHECKLIST TO ENSURE THAT
YOUR BABY IS BUCKLE UP CORRECTLY.
，
，
Click
FREEFIX I-SIZE
CAUTION
Pull the straps end straight towards you, not
upwards or downwards.
Please pay attention to the strap end. Whilst
）.
traveling (especially outside the car) it should
always be attached to the cover.
）.
For the safety of your baby, please check that:
1.
The harness straps of the car seat are comfort-
able but firmly fit around your child.
2.
The harness straps are adjusted correctly.
3.
The harness straps are not twisted.
4.
The buckle tongues are engaged in the harness
buckle.
DE
（
EN
FR
NL
37
Werbung
