The cover of the detergent container does not close.
➢ Setting is not OFF.
➢ Dishes block the container of the
detergent.
➢ Normal.
➢ Aluminium-made objects touched
the dishes.
Water remains on the bottom of the appliance.
➢ Normal.
1. Overfilled rinse aid container /
spilled rinse aid.
2. The appliance is not levelled.
If the appliance shows a malfunction not noted on the schedule above or if you have
checked all items on the above schedule but the problem still exists, please contact a
service department.
8.1 Error codes
Code
E 1
E 4
Some detergent is left in the container.
Black or grey marks on the dishes.
Appliance leaks.
Meaning
Longer inlet time.
Overflow.
detergent only to avoid formation
of foam.
➢ Select setting OFF and push the
door latch to the left.
➢ Place the dishes properly..
Steam.
➢ There is some steam coming
through the vent near the door latch
during drying and water draining.
➢ Clean the marks with a mild
abrasive cleaner by hand.
➢ A small amount of clean water
around the outlet keeps the water
seal functioning.
1. Wipe up the rinse aid.
2. Level the appliance.
Possible causes
Tap is closed, water intake is
restricted or water pressure is too
low.
Some element of the appliance is
leaking.
76