Herunterladen Diese Seite drucken

Pkm GSP12A++7TI2 Bedienungsanleitung Seite 48

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10. Do not operate the appliance unless all components are installed properly.
11. Do not stand or lean on the racks or the door.
12. Plastic-made items must not touch the heating elements.
13. Only wash dishwasher-proof plastic-made items in the appliance. Such items are
labelled by their manufacturer.
14. After each rinse cycle check that the water-softener container is empty.
15. Never use cleaning sprays to clean the door as they can damage the lock and
electric components.
2. Installation
WARNING! The installation of pipes and electric equipment must be
carried out by qualified professionals only.
WARNING! Switch off the power supply before installation. RISK OF
ELECTRIC SHOCK!
2.1 Unpacking and Positioning
1. Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. The spray arms may be equipped with a transport protection. Remove the
transport protection before installing the appliance.
3. Install the appliance in a dry and well-ventilated place.
4. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
5. You can adjust the height of the appliance using the
adjusting screws of the feet. The inclination of the
appliance must not exceed 2
6. Connect the appliance to the mains properly.
7. The nameplate is inside the appliance or at the back.
2.2 Preparation of the installation
➢ Check that the supplied materials are complete (basing on the drill template).
➢ The preparations have to be carried out at the site of the appliance before
installation.
1. Choose a site beneath a water drain so you can install the water hoses easily.
0
.
48

Werbung

loading