Spray Arms; Control Panel And Appliance; Door - Pkm GSP12A++7TI2 Bedienungsanleitung

3. When operating from step 1 to 2, you remove the filter system, when operating
from step 2 to 1, you install the filter system.
❖ We recommend to clean the entire filter system once a week.
❖ Remove bigger remnants after each programme.
❖ Clean the coarse and micro filter with a washing-up brush.
❖ Do not knock against the filters as you will damage them. Your appliance will not
work properly if the filters are damaged.
❖ Always install the filters properly.
❖ Improperly installed filters may damage the appliance and dishes.

7.2 Spray arms

1: open.

7.3 Control panel and appliance

❖ Clean the control panel with a soft damp cloth and dry it carefully.
❖ Clean the exterior of the appliance with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any component
of the appliance.

7.4 Door

❖ Clean the sides of the door with a warm damp cloth.
❖ Clean the exterior surface with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean the door of the
appliance.
➢ Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
➢ To remove the upper spray arm unscrew
the nut (clockwise) and remove the spray
arm. To remove the lower spray arm, lift
it upwards.
➢ Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
➢ Rinse the spray arm with flowing water
and reinstall it.
73