Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Selecting of a programme
Starting of a programme
End of a programme
Close the tap,
unload the racks
Before you start operating the appliance, check that
1. the appliance is positioned and levelled properly.
2. the inlet valve is opened.
3. the connections of the hoses do not leak.
4. the appliance is plugged in properly.
5. the power is switched on.
6. the hoses are not knotted.
7. you have removed the complete packaging material..
Before you operate the appliance for the first time
A) Adjust the water softener.
B) Pour 1 l water into the container of the water softener and pour in the water
softener (= dishwasher salt).
C) Pour in the rinse aid.
D) Select a washing programme.
4.2 Water softener
Press the Programme button until the selected
programme is indicated on the display.
Close the door and open the tap. Then press the
S
/P
button. The programme will start after
TART
AUSE
approx. 10 seconds.
When a programme has ended, an acoustic signal
sounds eight times The programme has ended. Switch
off the appliance using the
WARNING! Open the door carefully. Hot water
vapour can escape when the door has been
opened!
Close the tap. Wait approx. 15 minutes, before you
unload the racks. Unload the lower rack first.
60
/
button.
ON
OFF
Werbung
