Technical Data; Waste Management - Pkm GSP12A++7TI2 Bedienungsanleitung

If overflow occurs, turn off the main water supply before calling a service. If there is
water in the base pan because of an overfill or small leak, remove the water before
restarting the dishwasher.

9. Technical data

Model
Control
Cleaning capacity
Energy efficiency class
Annual energy consumption
Energy consumption/1 standard cycle
Energy consumption/left-on mode
Water consumption
Drying efficiency class
Standard cleaning cycle/duration
Noise emission
Mounting
Could be built-in
Dimensions H*W*D in cm
Water pressure (flow pressure)
Water temperature
1. From A (highest efficiency) to G (lowest efficiency).
2. Based on 100 standard cleaning cycles using cold water fill and low power modes.
The actual energy consumption depends on the type of use.
3. The actual water consumption depends on the type of use.
4. From A (highest efficiency) to G (lowest efficiency).

10. Waste management

1
2
3
4
77
Dishwasher, partly integrated
Electronic
12 standard place settings
E
92.00 kWh
0.923 kWh
0.49 W
11 l
A
220 minutes
49 dB(A)
Built-in
yes
82.00*60.00*55.00
0.4-10 bar = 0.04-1.0 MPa
Max. 65 0 C