Werbung
WQ-CD220L
©
How to remove the flywheel (TAPE 2)
(See Fig. 12-1.)
1. Remove the belt.
2.
Remove the screw (F1) to remove the pause kick lever.
3.
Remove
the stop washer
(F2) with a small
precision
screwdriver to extract the flywheel from the capstan metal.
Note:
When the stop washer is deformed or damaged, replace it with a
new one.
How to remove the flywheel (TAPE 1)
(See Fig. 12-2.)
1. Remove the belt.
2.
Remove the stop washer (G1) with a small precision
screwdriver to extract the flywheel from the capstan metal.
Note:
When the stop washer is deformed or damaged, replace it with a
new one.
How to remove the motor
(See Fig. 12-3, 4.)
1.
Remove the belt.
2.
Remove the 4 screws (H1) to remove the motor fixtire.
3.
Remove the 2 screws (H2) to remove the motor.
Note:
When mounting the motor, pay attention to the motor mounting
angle.
Bottom Side View
Figure 12-3
How to reinstall the parts
Install each part in the reverse order of the removal with care.
es
Pause
Kick Lever
Stop Washer
(F2) x1
A
ST
\\
Pe
Ll
BS
©
(Ft) x4
Flywheel
2X 6.1mm
y ae
Figure 12-1
Stop Washer
(G1)
Flywheel
Figure 12-2
Top Side View
Figure 12-4
Werbung
