Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In case of doubt, do not use the water cleaner but contact an authorised service centre so that a Skilled
Technician can check the appliance.
3.1 Identification Label and Warning Labels
See Fig. 1 at the front of these operating and maintenance instructions.
The identification label (7) contains the serial number and the main technical specifications of the water
cleaner.
The warning labels (5) and (11) inform you of any other risks, such as: do not use the high pressure cleaner
unless you have read the instructions manual; do not use the high pressure cleaner for washing people,
animals, electrical equipment or the high-pressure cleaner itself.
WARNING
• After removing the appliance from the packing materials, check that the identification label and the warning
labels are present and are legible. If this is not the case, contact your dealer or an authorised service centre
so they can be replaced.
• If the identification label and the warning labels deteriorate during use, contact your dealer or an authorised
service centre so they can be replaced.
3.2 Standard Accessories
Make sure that in the product package that was bought there are the following elements:
• high-pressure water cleaner KL;
• high-pressure delivery pipe with fast coupling;
• water brush (Extra only);
• lance hose;
• rotating nozzle head (Extra only);
• nozzle support head
• foaming lance;
• use and maintenance manual;
• warranty certificate;
• service centres booklet;
• nozzle cleaning pin;
• handlebar;
• 2 screws to secure handle,
In case of problems, apply to the dealer or to an authorised service centre.
3.3 Optional Accessories
The standard accessories for the high pressure cleaner can be integrated with the following vast range
of accessories:
• Sandblasting lance: designed for smoothing down surfaces, eliminating rust, paint, deposits etc.
• Pipe-draining probe: designed for unblocking pipes and ducts.
• Rotating water jet brush: designed for cleaning delicate surfaces.
• floor cleaning lance.
WARNING
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they may even
make it dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their general use,
safety warnings, installation and maintenance.
4 INSTALLATION
4.1 Assembling the Accessories
a) Insert the handling bar (3) onto the body of the high pressure cleaner. Make sure you fully insert the
bar into the high-pressure cleaner's body (the front surfaces must be aligned with one another). Secure
22
the bar with the 2 screws supplied (cross head screwdriver not supplied). Step A in Fig. 2
Werbung
