Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.3 Wet/dry LED indicator
In addition to numeric measurement display in % of relative mate-
rial moisture, the LED display also provides a material-dependent
evaluation of moisture. The LED display bar becomes larger, from
left to right, with increasing moisture content. The 12-position LED
display is subdivided into 4 green (dry), 3 yellow (moist) and 5 red
(wet) segments. Wet material causes an additional acoustic signal.
GB
Green = dry
Yellow = moist
Red = wet
The classification „dry" means that materials in a heated room
have reached a balanced moisture level and are thus suitable for
further processing.
6.4 Setting the wet/dry threshold values in index mode
and Index Zoom mode
The wet/dry LED indicator is programmed in line with the relevant
material characteristics so the LEDs also provide information about
whether the material should be classified as dry, moist or wet.
However the values in index mode and Index Zoom mode, which
is independent of the material type, are output on a neutral scale
whose value increases as the moisture level rises.
The LED indicator can be specifically
programmed for index mode and
Index Zoom mode by defining the
end values for „dry" and „wet".
The difference between the value
set for „dry" and that set for „wet"
is converted and displayed by the
12 LEDs.
133
Werbung
