Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Integrated building materials / measuring range
01 Anhydrite screed (AE, AFE) /
0 ... 29.5%
02 Concrete C12/15 / 0.7 ... 3.3%
03 Concrete C20/25 / 1.1 ... 3.9%
04 Concrete C30/37 / 1.4 ... 3.7%
05 Gypsum plaster / 0.1 ... 38.2%
6.2.2 Index mode
In addition to the material characteristics stored in the measuring
device, index mode makes it possible to measure other building
materials (09–31) using the resistance measurement method
(see index mode conversion table). The displayed value (0 through
1000) serves as the basis.
Activate index mode in your measuring device (Section 5). In order
to determine the degree of moisture in a type of building mate-
rial, first find the material number for the building material to be
measured. Following this, read the measured value from the scale
displayed on the measuring device for index mode. Now determine
the value for the corresponding material number in the table. If this
value has a dark grey background, the material is to be classified
as „wet", values without coloured background are considered to be
„dry".
6.2.3 Index mode conversion tables
09 Cement screed with
bitumen additive
10 Cement screed with
plastic additive
11 ARDURAPID
cement screed
130
Index mode, building materials
12 Elastizell screed
13 Plaster screed
14 Wood cement screed
15 Lime mortar
16 Cement mortar ZM 1:3
17 Stone-wood, xylolite
06 Limestone, bulk density
1.9 / 0.5 ... 18.7%
07 Cellular concrete (Hebel) /
2.0 ... 171.2%
08 Cement screed without additive /
1.0 ... 4.5%
18 Polystyrene, Styro-
foam
19 Soft fibre board wood,
bitumen
20 Cement-bonded
particle board
21 Clay bricks, bricks
Translation of the original instruction
Werbung
