Adding Regenerative; Service Message - BWT Bewamat 25A Einbau- Und Bedienungsanleitung

EN
4433 L
46
SALt
8.7

Adding regenerative

Refill the regenerative no later than when the sieve
base becomes visible or when SALt is indicated on
the display. All commonly available regeneration
salts (salt tablets in accordance with DIN EN 973
type A, e.g. Clarosal or Sanisal/Sanitabs) can be
used.
● Open the cover (4). Pour regenerative into the
storage area (5).
● Press OK button
The SALt display disappears.
Refill the unit in such a way that no dirt can get
into the storage area (5) (if necessary, clean the
packages containing the regenerative before use).
4
In case of any soiling clean the storage area or brine
cavity (6) with drinking water thoroughly.
5
6
8.8

Service message

A flashing litre display indicates that it is time for
servicing. The service message appears after 150
regenerations.
Please contact after-sales service.