YATO YT-73080 Bedienungsanleitung Seite 18

GB
the soldering tool on the base, and then connect it to the mains. Wait until the soldering tip has reached a required
temperature. Commence soldering using fl ux and fi ller metal (soldering tin). The soldering tip must only touch the places
that are meant to be soldered. The fi ller metal should fl ow off the soldering tip to the weld, when it reaches an adequate
temperature. Once the task has been fi nished and when the tool is not operated, it must be placed on the base.
MAINTENANCE AND INSPECTIONS
NOTE! Before any adjustment, technical service or maintenance, the plug of the tool must be removed from the mains
socket. Once work has concluded, the body, ventilating holes, switches, additional handle and protections must be
cleaned, for example with an air jet (whose pressure must not exceed 0.3 MPa), brush or a dry cloth, without any chemi-
cals or cleaning liquids. The tool and the handles must be cleaned with a dry, clean cloth.
O P E R A T I N G M A N U A L
18