YATO YT-73080 Bedienungsanleitung Seite 12

YT-73080
PROPERTIES OF THE DEVICE
The all-purpose meter is a digital measurement device designed to measure various electrical quantities.
Before using the meter, read the whole manual and keep it.
The meter has a plastic housing, a liquid crystal display and a measurement range selector. The housing is equipped
with measurement sockets and a transistor test socket. The meter is equipped with measurement cables with plugs. The
meter is sold without a battery.
ATTENTION! The meter is not a measurement device as it is construed within the „Measurement Law"
TECHNICA DATA
Display: LCD – maximum displayed result: 1999
Sampling frequency: approximately 2-3 times per second
Overload signalling: digit „1" is displayed
Polarization signalling: symbol „-" is displayed before the result of the measurement
Battery: 6F22; 9 V
Working temperature: 0 ÷ 40°C at the relative humidity <75%
Storage temperature: -10°C ÷ +50°C; at the relative humidity <85%
External dimensions: 126 x 70 x 24 mm (without the rubber protection)
Weight: approximately 140 g (without the rubber protection)
ATTENTION! It is prohibited to measure electrical quantities exceeding the maximum measurement range of
the meter.
Parameter
Range
Catalogue number 200 mV
2000 mV
20 V
YT-73080
200 V
500 V
Overload protection: range 200 mV: 220 V rms;
Remarks
other ranges: 500 V d.c. or 500 V a.c. rms
Range
200 V
500 V
Precision: ± % of the indication + weight of the least signifi cant digit
OPERATION OF THE MULTIMETER
ATTENTION! In order to protect from electric shock before the housing of the device is opened, disconnect the
measurement cables and turn the meter off .
Safety instructions
Do not operate the meter in the presence of an excessive humidity, toxic or infl ammable vapours and in explosive
atmosphere. Before each use check the conditions of the meter and the measurement cables. If any damage is detected,
it is prohibited to operate the device. Damaged cables must be replaced. In case of any doubts, consult the manufacturer.
During measurements keep the measurement cables and leads by the insulated parts. Do not touch the places of
measurement or the sockets of the meter which are not being used. Before the measured quantity is modifi ed, disconnect
12
Direct voltage
Grain Precision
0.1 mV ±(0.5% + 3)
1 mV
10 mV ±(1.0% + 5)
100 mV
1 V ±(1.2% + 10)
Alternating voltage
Grain Precision
100 mV
±(1.2% + 10)
1 V
f = 45 ÷ 450 Hz
IN
O P E R A T I N G
GB
Direct current
Range Grain
200 μA 0.1 μA
2000 μA 1 μA ±(1.8% + 2)
20 mA 10 μA
200 mA 100 μA ±(2,0% + 2)
5 A 10 mA ±(2,0% +10)
Overload protection: fuse 0.5A/250 V; range 5 A:
fuse 5A/250 V - duration of measurement < 10 s in
intervals > 15 min.
I
B
10 μA
M A N U A L
Resistance
Precision Range
200 Ω
2000 Ω
20 k Ω
200 k Ω
2000 k Ω
U
Transistor test
U
CE
2,8 V
Grain Precision
0.1 Ω ±(1.0% + 10)
1 Ω
10 Ω
±(1.0% + 2)
100 Ω
1 k Ω
= 3V
ab
Diode test
Resolution
1mV