Error Code - Pkm IN4B-3G Bedienungsanleitung

C
C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
 Cookware
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
 Technical malfunction.
If the appliance shows a malfunction not noted on the schedule above or if you have
checked all items on the above schedule but the problem still exists, please contact
the shop you purchased the appliance at.

7. Error Code

If an abnormality comes up, the hob will enter the protective state automatically
and display corresponding protective codes.
Problem
E1
E2/E3
E4/E5/E6
depending on model
6
AUSES
cannot be detected,
positioned on
(
6
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
Possible causes
Signal lost (PCB failure)
Abnormal high/Low
Thermistor failure.
E
RROR
.
DISPLAYED
 Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
 Note
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
input voltage
74
M
EASURES
).
the complete
What to do
Please contact after sales
service.
Stop cooking and wait
until input voltage back
to normal. If not please
contact service center.
Please contact service
center to repair.
error-code,