The installation must meet the safety requirements as well as the legal rules and
regulations.
The wall sat the hob should be covered with heat-resistant material, e.g. ceramic tiles.
The power cable must not come into contact with cabinet doors or drawers.
The appliance must be supplied with an adequate flow of fresh air from outside the
cabinet to the base of the hob.
If the hob is installed above an oven, the oven must be equipped with a cooling
system.
Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
The circuit breaker must be easily accessible.
2.3 Selection of installation equipment / Dimensions
Cut out the installation hole as described on the drawing below. For installation and use,
a minimum of 50 mm space shall be preserved around the hole. The thickness of the
work top should be at least 30 mm. Choose heat-resistant materials for the work top
only to avoid any deformation caused by the heat-radiation of the appliance.
WARNING! The safety distance between the hob and a wall cupboard
above should be at least 450 mm.
WARNING! The safety distance between the hob and an extractor hood
above should be at least 650 mm.
51