Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DANGER!
professional. Do not modify the energy supply. The connection must be
carried out in accordance with the current local and legal regulations. RISK
OF ELECTRIC SHOCK!
WARNING! The safety distance between the hob and a wall cupboard
above should be at least 450 mm.
WARNING! The safety distance between the hob and an extractor hood
above should be at least 650 mm.
CAUTION! Do not install the appliance above cooling equipment, dish
washers or laundry dryers.
CAUTION! When installing the appliance ensure optimal heat radiation
to maintain the operating safety.
CAUTION! The wall and the reach of the heat radiation above the
worktop must be made of heat-resistant materials.
CAUTION! To avoid any damage, the sandwich layer and adhesive
must resist heat.
2.1 Unpacking and positioning
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
WASTE MANAGEMENT
2. The appliance may be equipped with the transport-protection. Be very careful and
do not use any aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Check that the appliance and the power cord are not damaged.
4. Connect the appliance to a dedicated socket only.
5. Do not install the appliance in a place where it may come in contact with water or
rain; otherwise the insulation of the electrical system will be damaged.
6. Connect the appliance to the mains properly.
2.2 Pre-installation requirements
The worktop must be rectangular and plane and made of heat-resisting material.
Structural elements should not interfere with the installation area.
All electrical work must be carried out by a qualified
.
50
Werbung
