Trouble Shooting - Pkm IN4B-3G Bedienungsanleitung

S
TRATEGY
1. Disconnect the appliance from the
mains (fuse-box).
2. Take away the contamination.
3. Wipe the sensors with a damp
sponge or cloth.
4. Dry the sensors with kitchen paper.
5. Connect the appliance to the mains
again.

6. Trouble shooting

1. Switch off the entire appliance.
2. Disconnect the appliance from the mains (fuse box of your household power
supply).
3. Contact the shop you purchased the appliance at.
 Check the schedule below before you contact the shop you purchased the appliance
at.
C
 Break in the power supply.
K
IND OF CONTAMINATION
C
ONTAMINATION OF THE CONTROL PANEL
E
MERGENCY MEASURES
AUSES
T
HE APPLIANCE CANNOT BE SWITCHED ON
SAFETY GUIDELINES
The appliance
automatically turn off. The sensors may
not work properly when they are wet.
Dry the control panel carefully before
you put it into operation again.
E
RROR
 Check that the appliance is connected
to the mains. Check the household
fuse box. Is there a power failure at
your place of residence?
72
.
may beep
:
M
EASURES
.
and