Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preparation Before Printing
Power Connection
First, connect the power cord to the socket and press the switch to start the machine.
After that, turn on the touch screen.
Filament Loading
Open the filament chamber door, hang the filament on the filament spool holder, and
pass the filament clockwise through the corresponding filament sensor at the upper left
of the chamber inside until the filament is visible from the other end of the filament
guide tube. After that, press the filament handle on the extruder and insert the filament
into the extruder.
Filament
Handle
7
Werbung
