Flashforge Guider 3 Benutzerhandbuch Seite 14

Preheating Screen
The temperature of the extruder and platform can be set in advance as required on the
preheating screen.
Tools Screen
[Calibration]: Z-axis calibration, sensor calibration, assist calibration (complete
•
mode, simplified mode).
[Home]: Here you can make each axis of the printer return to the zero position.
•
[Move]: Here you can manually move the X-, Y-, and Z-axis of the printer.
•
[Network]: here you can connect to the wireless network, wired network, and
•
hotspot.
[Cloud]: Here you can connect to FlashCloud or Polar Cloud.
•
[Camera]: Here you can turn on the camera and view the time-lapse video.
•
[About]: Here you can find basic information about the printer.
•
[Status]: Here you can find the running status of the printer.
•
[Maintain]: Here you can find some items to check when you encounter a
•
problem with your 3D printer.
[Upgrade]: Here you can search for and perform a firmware upgrade. Users can
•
upgrade to the latest firmware of the printer when connecting to the wireless
network.
14