Software Installation - Flashforge Guider 3 Benutzerhandbuch

Software Installation

Method 1: Find the installation package of the FlashPrint software in the USB flash drive
and select the corresponding system version for installation.
Method 2: Download the latest slicing software installation package from Flashforge's
official website: www.flashforge.com.
3D printing process: Get the model file – slice it with your slicing software – transfer the
file to the printer for printing.
First Printing
File Transfer (Wi-Fi Transfer)
Import the file to FlashPrint for slicing and select the printer type as Guider 3 to connect
to it. Alternatively, you can connect it by entering IP address, or by automatic scanning.
You can view the IP address in the [About] submenu on the touch screen. After the
slicing is completed, send the file directly to the printer for printing.
Printing From a USB Flash Drive
The 3D printer can also perform printing via a USB flash drive. Save the sliced file to a
USB flash drive, insert the USB flash drive into the 3D printer, and select the
corresponding file to print.
Cloud Printing
Print via FlashCloud
Enter the FlashCloud website (https://cloud.sz3dp.com), register an account, and then
log in after completing email activation. Upon opening the FlashCloud app, click
[My Printer] button and select [Add Printer]. Fill in the registration code on the "Add
Printer" page and name the printer. After clicking the [OK] button, necessary information
will appear on the FlashCloud interface of the printer.
Print via Polar Cloud
Enter the Polar Cloud website (https://polar3d.com) and register an account. After
logging in, click the avatar icon in the upper right corner, click [Settings] and click the PIN
Code in the menu to query the PIN code. After connecting Guider 3 to the network, turn
on the Polar Cloud switch and enter the account and PIN code.
10