Herunterladen Diese Seite drucken

Briggs & Stratton SZT350 Bedienungsanleitung Seite 5

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
Products Covered by This
Manual
The following products are covered by this manual: 
 2691351-00, 2691351-01, 2691351-02, 2691352-00,
2691352-01, 2691352-02, 2691353-00, 2691353-01,
2691353-02, 2691353-03, 2691357-00, 2691357-01,
2691357-02, 2691359-00, 2691359-01, 2691359-02,
2691359-03, 2691391-00, 2691391-01, 2691391-02,
2691395-00, 2691395-01, 2691395-02, 2691410-00,
2691410-01, 2691410-02, 2691411-00, 2691411-01,
2691411-02, 2691412-00, 2691459-01, 2691460-01 
Manual Contents:
Operator Safety..................................................................... 5
Safety Interlock Systems Checks..................................... 10
Features and Controls........................................................11
Operation............................................................................. 12
Maintenance.........................................................................16
Troubleshooting.................................................................. 19
Specifications...................................................................... 20
 Save these instructions. This manual contains safety
information to make you aware of the hazards and risks
associated with the product and how to avoid them. It also
contains important instructions that should be followed
during the initial set-up, operation, and maintenance of
the product. Save these original instructions for future
reference. 
Note: For instructions to install, remove, and level the mower
deck (including belt replacement), see the Mower Deck
Manual supplied with this machine. 
Note: The engine information contained in this manual applies
®
to Briggs & Stratton
 engines only. For information regarding
non-Briggs engines, refer to the engine manual supplied with
your unit. 
The images in this document are representative, and are
meant to complement the instructional copy they accompany.
Your unit may vary from the images displayed. LEFT and
RIGHT are as seen from the operator's position.
Operator Safety
Safety Icons
 Callout 
Alert. 
Read the manual. 
Fire hazard. 
Thrown objects. 
Amputation - hand in blade. 
Amputation - foot in blade. 
Keep children away. 
Maximum slope angle for safe operation. 
Slippery slopes. 
Amputation - rotating parts. 
Avoid turning down slopes; if possible turn up slopes. 
Safety Alert Symbol and Signal Words
The safety alert symbol (
information about hazards that can result in personal injury. A
signal word (DANGER, WARNING, or CAUTION) is used with
the alert symbol to indicate the likelihood and the potential
severity of injury. In addition, a hazard symbol may be used to
represent the type of hazard.
DANGER indicates a hazard which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates a situation that could result in damage
to the product.
 Description 
) is used to identify safety
5

Werbung

loading