EINHELL RT-CS 190 L Originalbetriebsanleitung Seite 14

Anleitung_RT_CS_190_L_SPK1:_
GB
3. Proper use
The hand-held circular saw is designed for sawing
straight cuts in wood, wood-type materials and
plastics.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
Power input:
Idling speed:
Cutting depth at 90°:
Cutting depth at 45°:
Saw blade:
Blade holder:
Blade thickness:
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
14
22.04.2010 10:55 Uhr Seite 14
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
Additional handle
Vibration emission value a
K uncertainty = 1.5 m/s
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
230 V ~ 50 Hz
assessment of a harmful effect.
1500 W
-1 Keep the noise emissions and vibrations to a
5,200 min
minimum.
66 mm
Only use appliances which are in perfect working
44 mm
order.
Service and clean the appliance regularly.
Ø 190 mm
Adapt your working style to suit the appliance.
Ø 30 mm
Do not overload the appliance.
Have the appliance serviced whenever
2.4 mm
necessary.
II / ®
Switch the appliance off when it is not in use.
5.34 kg
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
1. Lung damage if no suitable protective dust mask
94 dB(A)
is used.
3 dB
2. Damage to hearing if no suitable ear protection is
used.
108 dB(A)
3. Health damage caused by hand-arm vibrations if
3 dB
the equipment is used over a prolonged period or
is not properly guided and maintained.
2
= 3.985 m/s
h
2
2
≤ 2.5 m/s
h
2