Elica NIKOLATESLA FIT XL KIT0180522 Montage- Und Gebrauchsanweisungen Seite 22

When the cooking zones are switched off, the hood adapts
its extraction speed, decreasing it gradually, to eliminate
residual vapours and odours.
To activate this function:
Press (14);
Repeat the operation to deactivate.
Note: if, during automatic operation, the speeds from
are selected using the Selection bar (3), automatic
operation is interrupted; if, on the other hand, the Power
Booster is selected, automatic operation will resume at the
end of the timer and, in the meantime, the symbol
keeps flashing.
Note: if the hob automatically shuts down with Automatic
mode active, the extractor fan will automatically turn off
gradually.
● Filter saturation indicator
The hood indicates when filter maintenance is needed:
For the carbon/ceramic odour filters, FILTER (13) lights up
For the grease filter, FILTER (13) lights up and flashes
Note: this function is disabled by default (see how to
enable it in the paragraph "Activation of filter saturation
indicator")
● Reset filter saturation
After performing maintenance on the filters (grease and/or
carbon/ceramic) press and hold FILTER (13); it will turn off
and the indicator counter will restart.
● Activation of filter saturation indicator
Note: This indicator is normally deactivated.
To activate it, proceed as follows:
• switch on the hob ;
• with the extraction motor and cooking zones off, press the
Selection zone (12)
• press and hold HOOD (11) until the Display (12) shows
the letters and flashing alternately.
= carbon/ceramic odour filters;
CARBON/CERAMIC ODOUR FILTERS
• press the Display (12) when the letter
• press FILTER (13) fixed light.
• press and hold HOOD (11) again to confirm the activation
of the carbon/ceramic
odour filter.
GREASE FILTER
• press the Display (12) when the letter
to
= grease filters;
appears
appears
22
• press FILTER (13) flashing light.
• press and hold HOOD (11) again to confirm the activation
of the grease filter indication.