Bauknecht ECSK9 P845 BM Bedienungsanleitung Seite 25

temperature of the oven varies according to the
function that you have selected, but cooking is
always programmed to finish once the specified
temperature has been reached.
Place food in the oven and connect the food probe to
the socket. Keep the probe as far away from the heat
source as possible. Close the oven door.
Tap . You can choose between the manual (by
cooking method) and My Menu (by food type)
functions if use of the probe is allowed or required.
How would you like to
program the probe?
BY COOKING METHOD
BY FOOD TYPE
Once a cooking function has been started, it will be cancelled
if the probe is removed. Always unplug and remove the
probe from the oven when taking out the food.
Probe can be controlled remotely using Bauknecht Home Net
App on your mobile device.
USING THE FOOD PROBE
Using the food probe enables you to measure the
core temperature of the food during cooking.
Insert the food probe deep into
the meat, avoiding bones or
fatty areas:
Poultry: Insert the tip into the
centre of the breast, avoiding
hollow areas.
Joints or legs of meat: Insert the
tip into the thickest part.
Fish (whole): Position the tip in
the thickest part, avoiding the
spine.
SELF CLEAN
The action of the steam released during this special
cleaning cycle allows dirt and food residues to be
removed with ease.
DRAIN
The drain function allows the water to be drained
in order to prevent stagnation in the boiler. It is
advisable to always carry out "Draining" after the oven
has been used. The display will indicate when the
boiler has to be completely drained. After a certain
number of cooking this action will be mandatory and
it will not possible start a steam function before done
it.
Once selected the "DRAIN" function or when
suggested from display, tap "START" and follow the
actions indicated.
Once finished, drain and rinse the tank with drinking
water.
Please note: If the boiler is too hot, the function will not be
activated.
DESCALE
This special function, activated at regular intervals,
allows you to keep the boiler and the water circuit in
the best condition.
The average duration of the full function is around
240 minutes.
The function is divided into several phases: draining,
descaling, rinsing. Once the function is started, follow
all the steps indicated on the display and tap "START"
when done to start each phase.
For best results, we recommend filling the tank with
product provided by After Sales Service (please
follow instructions provided with the product).
Do not switch off the oven until the end. Cooking
functions cannot be activated during the cleaning
cycle.
Please note: A message will be shown on display, to remind
you to execute this operation regularly.
MUTE
Tap the icon to mute or unmute all the sounds and
alarms.
CONTROL LOCK
The "Control Lock" enables you to lock the buttons on
the touch pad so they cannot be pressed accidently.
To activate the lock:
• Tap the icon.
To deactivate the lock:
• Tap the display.
• Swipe up on the message shown.
Control Lock
The product is locked.
Swipe up to unlock.
PREFERENCES
For changing several oven settings.
WIFI
For changing settings or configuring a new home
network.
INFO
For switching off "Store Demo Mode", resetting the
product and obtaining further information about the
product.
EN
9