Scheppach RBP350 Originalbetriebsanleitung Seite 19

The machine may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our equipment was not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the device is used in commercial
or industrial applications, or for equivalent work.
5. General safety instructions
m WARNING - Read all safety information, instruc-
tions, illustrations and technical data for this elec-
tric tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" used in the safety instructions
refers to mains-powered electrical tools (with a mains
cable) and battery-powered electrical tools (without a
mains cable).
General safety instructions
• This device is not designed to be operated by persons
(including children) with impaired physical, sensory
or mental capabilities, or who have insufficient expe-
rience and/or insufficient knowledge unless they are
being supervised by a person who is responsible for
their safety or they are receiving instruction about how
this device is to be used. Children should not be left
unattended, to ensure they do not play with the device.
• Persons who are unfamiliar with the operating man-
ual may not operate the device. Persons under 16
years of age are not permitted to operate the device.
• If persons are in the water, the device must not be
operated.
• Take appropriate measures to keep children away
from the device while it is running.
• Dispose of the packaging material properly.
• Do not use the device in the vicinity of flammable
fluids or gases. There is a risk of fire or explosion if
disregarded.
• The pumping of aggressive, abrasive (scouring),
corrosive, flammable (e.g. motor fuels) or explosive
liquids, salt water, cleaning agents and foodstuffs is
not permitted.
• Store the device in a dry place and out of reach of
children.
• The temperature of the pumped liquid shall not ex-
ceed 35°C.
• Do not work with a damaged, incomplete or modified
device without the manufacturer's consent. Before
commissioning, have a specialist check that the re-
quired electrical protective measures are in place.
• Supervise the device during operation in order to de-
tect automatic shutdown or dry-running of the pump
in good time. Check the function of the float switch
regularly (see chapter "Commissioning"). Failure to
do so will invalidate warranty and liability claims.
• Please note that the pump is not suitable for continu-
ous operation (e.g. for watercourses in garden ponds).
Check the device regularly for proper functioning.
• Please note that lubricants are used in the device,
which may cause damage or contamination due to
leakage. Do not use the pump in garden ponds with
fish or valuable plants. If lubricants leak out, they
may contaminate the liquid.
• Do not use the cable or hose to carry or fastened
the device.
• Protect the device from frost and dry-running.
• Only use original accessories and do not make any
modifications to the device.
• Please read the information on "Cleaning, mainte-
nance, storage" in the operating manual. All other
measures, in particular opening the device, must be
carried out by a qualified electrician. In the event of
repair, always contact our service centre.
Electrical safety instructions
• The mains plug must remain freely accessible when
operating the device.
• Before you put your new pump into operation, have
it professionally checked:
• Earthing, connection of the neutral line and resid-
ual current circuit breaker must comply with the
safety regulations of the power supply compa-
nies and function properly.
• Protect the electrical plug connections from
moisture.
• If there is a risk of flooding, fit the plug connec-
tions in the flood-proof area.
• Ensure that the mains voltage corresponds to the
specifications on the type plate.
• Carry out the electrical installation in accordance
with national regulations.
• Only connect the device to a mains socket with a
residual current device (RCD) with a rated leak-
age current of no more than 30 mA; fuse at least
6 amps.
www.scheppach.com GB | 19