Teac VRDS-10 Bedienungsanleitung Seite 12

Remote-Controlled Operation
@ Remote Control Unit
The provided Remote Control Unit allows
the unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
© Even if the remote control unit is
operated within the effective range,
remote control operation may be
impossible if there are any obstacles
between the player and the remote
control.
© If the remote control unit is operated
near other appliances which generate
infrared rays, or if other remote control
devices using infrared rays are used
near the player, the player may operate
incorrectly. In the reverse way, the
other appliances may operate
incorrectly.
@ Battery Installation
1. Remove the battery compartment
cover.
2. Insert two "AA" (R6, SUM-3) dry
batteries.
Make sure that the batteries are
inserted with their positive @® and
negative © poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If you notice that the distance between
the remote control unit and the player for
Correct operation becomes shorter, it
indicates that the batteries are exhaust-
ed. In this case replace the batteries with
new ones.
Precautions concerning batteries
© Be sure to insert the batteries with
correct positive ® and negative ©
polarities.
© Use batteries of the same type. Never
use different types of batteries
together.
@ Rechargeable and non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
© When the remote control unit is not to
be used for a long time (more than a
month), remove the batteries from the
remote control unit to prevent them
from leaking. If they leak, wipe away
the liquid inside the battery
compartment and replace the batteries
with new ones.
© Do not heat or disassemble batteries
and never dispose of old batteries by
throwing them in a fire.
==
Specifications
AUDIO
Number of Channels: 2
Frequency Response: 1 — 20,000 Hz +0.3 dB
Signal-to-Noise Rati
Better than 110 dB (1 kHz)
Dynamic Range: Better than 99 dB (1 kHz)
Harmonic Distortion: 0.0013 % (1 kHz)
Wow and Flutter:
Unmeasurable (Quartz accuracy)
Channel Separation:
Better than 110 dB (1 kHz)
Output: Analog; 2.2 V rms
Digital; 0.5 Vp-p/75 ohm (Coaxial)
-15 dBm — -21 dBm (Optical)
D/A Converter: "Bitstream" conversion
(Double differential operation)
Digital filter: 8-times oversampling 20-bit
digital filter
Analog filter: 3rd order Butterworth filter
SIGNAL FORMAT
Error Correction: CIRC (Cross Interleave
Reed-Solomon Code)
Sampling Frequency: 44.1 kHz
Quantization bit: 16-bit linear/channel
Channel Modulation Code:
EFM (Eight-to-Fourteen Modulation)
Channel Bit Rate: 4.3218 Mb/sec
PICKUP
Type: Objective lens drive, optical 3-beam
laser pickup
Objective Lens:
2-dimensional parallel drive
Laser Type:
GaAlAs type semiconductor laser
Wave Length: 780 nm
GENERAL
Power Requirements :
120/230 V AC, 50-60 Hz
(General Export Model)
120 V AC, 60 Hz
(U.S.A/Canada Model)
230 V AC, 50 Hz (Europe Model)
240 V AC, 50 Hz
(U.K/Australia Model)
Power Consumption: 22 watts
Dimensions (W x H x D):
442 x 149 x 331 mm
(17-3/8" x 5-7/8" x 13-1/16")
Weight (net): 10.0 kg (22-1/16 Ibs)
Standard Accessories:
Wireless Remote Control Unit
(RC-481), RCA pin-plug cord,
Lock key, Battery
(SUM-3, "AA", "RG" type) x 2
@ Improvements may result in specifica-
tion or feature changes without notice.
© Photos and illustrations may differ
slightly from production models.