Philips Comfort HR7600/1 Gebrauchsanweisung Seite 7

If the mains cord of this appliance is damaged,
it must always be replaced by Philips or a
service centre authorised by Philips, in order
to avoid hazardous situations.
Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
Do not exceed the quantities and preparation
times indicated in the tables and recipes.
Do not exceed the maximum content
indicated on the bowl, i.e. do not fill beyond
the top graduation.
The emulsifying disc, the blade and the insert
holder have to be placed on the tool holder
that stands in the bowl.
Unplug the appliance immediately after use.
Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
Always unplug the appliance before reaching
into the bowl with your fingers or an object
(e.g. a spatula).
Keep the appliance out of the reach of
children.
Never let the appliance run unattended.
Switch the appliance off before detaching any
accessory.
Never immerse the motor unit in water or
any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
When you fit the lid properly onto the bowl,
you will hear a click.
Remove the protective cover from the blade
before use.
Avoid touching the SHARP cutting edges of
the blade and the inserts, especially when the
appliance is plugged in.
If the blade gets stuck, unplug the appliance
before removing the ingredients that are
blocking the blade.
Let hot ingredients cool down before
processing them (max. temperature
80cC/175cF).
The bowl is not suitable for the microwave.
Using the appliance
C
1 Place the tool holder in the bowl.
C
2 Place the required accessory on the tool
holder (beware of the sharp cutting
edges!).
C
3 Close the lid.Turn it in the direction of the
arrows until you hear a click.
ENGLISH
7