Panasonic RM-710 Bedienungsanleitung Seite 8

CONTROLS AND FUNCTIONS
@® Scan button [scan]
When, with this button depressed, the tuning button® (up
or down) is pushed, the tuner will count (up or down) and
stop at the next valid frequency. After 5 seconds the same
® Fluorescent display tube
This will give a digital display of the frequency in MHz
(FM) and kHz (AM) received by the radio or the time (in
hours and minutes) at the moment.
is repeated for the next frequency.
The "'scan" function can be stopped by pushing the
tuning button® (up or down) again during the 5 seconds
of reception. ® Clock/frequency changeover button
When this button is depressed, the fluorescent display
tube changes over as follows.
clock (m=): Time is displayed.
' When any of the button relating to frequency
is operated, however, the tube shifts to ® Preset scan button [preset scan]
frequency display for 5 seconds.
When this button is depressed, one of the preset
channel. The channel is skipped if it is not broadcasting at
that time.
The "preset scan"' function can be stopped by depressing
the preset channel button® for that frequency, or
pressing again the preset scan button® during the 5
seconds of reception.
® Memory button [memory]
@ FM stereo indicator [FM stereo]
An LED is lit indicating that the broadcast being received
is stereo.
@® Preset channel button [ch. 1—ch. 6]
This button is depressed when you want to tune in to the
station memorized in one of the 12 locations (6 for AM/6
for FM). The desired station can be tuned in to instantly
(by one-touch manipulation).
@ Power switch [power]
When this button is depressed, the LED lights up and the
power is turned on for all components except the cassette
deck.
When you do not use the system, be sure to depress this
button to switch the power off. The LED then goes off.
With this switch turned off, however, and the automobile's
key switch is "'on", the fluorescent display tube® is lit,
and the following switches are in operation.
e@Dimmer button®
eTime adjusting button®
© Tuning button [tuning]
up: When this bution is depressed, the frequency
displayed on the fluorescent display tube counts
up (higher).
down: When this button is depressed, the frequency
psec Sa
Sara al
@ Stop/cassette eject button [stop/eject]
A single push of either button moves the frequency up or
When this button is depressed, tape play will stop and the
down by 0.05 MHz in case of FM and 9 kHz in case of AM. cassette is ejected.