Panasonic RM-710 Bedienungsanleitung Seite 18

General
Power Source: DC 12 V(11~16 V usable)
Negative Ground only
Test Voltage: 14.4V
Power Consumption: 12.8A at rated power outpu
(Memory Back up 3 mA)
Dimensions: Console unit;
708(L)x226(W) x41(D) mm
(27 4" x842"x1?")
Cassette Deck Section Depth
83 mm (33%")
Power amplifier;
205(W) x 206(H)x50(D) mm
(8%"X8$"X2")
Weight: Console unit; 4.4 kg
(9 Ib 11 02)
Power amplifier; 2.3 kg
(5 Ib 1 02)
FM Tuner Section
Frequency Range: 87.50~ 108.05 MHz
Usable Sensitivity: 16.dBf (1.7nV 750)
50 dB Quieting
Sensitivity: 18 dBF (2.2uV 750)
THD: 0.15%
Signal to Noise Ratio: 72dB
Image Rejection: 65 dB
IF Rejection: 95 dB
RF IMD Rejection: 80 dB
AM Suppression: 55 dB
Frequency Response: 20~15,000 Hz (+3 dB)
Stereo Separation: 45 dB at 1 kHz
AM Tuner Section —
Frequency Range: 522~1611 kHz
Max. Sensitivity: 20 dB (at 500 mW output)
Usable Sensitivity: 30 dB (S/N 20 dB)
Selectivity: 45 dB (+10 kHz)
Image Rejection: 90 dB
IF Rejection: 55 dB
Cassette Deck Section
Wow and Flutter: 0.13% (WRMS)
Cross-Talk: 55 dB
Signal to Noise Ratio: 65 dB Dolby NRin
55 dB Dolby NR out
Frequency Response: 30~15,000 Hz (+3 dB)
Stereo Separation: 40 dB at 1,000 Hz
Preamplifier Section
Frequency Response: 20~50,000 Hz (+3 dB)
THD: 0.02% (1 kHz)
Signal to Noise Ratio: | 70dB
Tone Control: 60 Hz +12dB
250 Hz +12dB
1kHz+12dB
3.5 kHz +12 dB
10 kHz +12dB
Loudness: 100 Hz +8 dB
10 kHz +3 dB
Sound Attenuator: —20 dB
Power Amplifier Section
Rated Power Output: (Front) 10 watts per channel
'minimum continuous average
power into 4 ohms, both channels
driven, from 20 to 20,000 Hz with
no more than 0.5% total harmonic
distortion
(Rear) 20 watts per channel
minimum continuous average
power into 4 ohms, both channels
driven, from 20 to 20,000 Hz with no
more than 0.5% total harmonic
distortion
Max. Power Output: Total 120 watts RMS
Front; 20 watts per channel
Rear; 40 watts per channel
Frequency Response: 20~40,000 Hz (+3 dB)
Signal to Noise Ratio: 82 dB
Fuse