Herunterladen Diese Seite drucken

IKEA TYLLSNAS Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für TYLLSNAS:

Werbung

ENGLISH
Installation
To make the product ready for use, be careful that
the electrical wiring and plumbing are appropriate
by referring to the information in the user manual.
If not, call a qualified electrician and plumber and
have the necessary arrangements made.
AWARNING: The manufacturer is not liable for
damages caused by operations by unauthorized
persons. To avoid shaking, place the product on a
flat surface.
AWARNING: During the installation, the power
plug of the product should not be plugged in.
Otherwise, there is a danger of death or serious
injury!
AWARNING: If the doorway of the room to where
the product will be placed is so narrow that the
product cannot pass through, pass the product
by turning it to side; otherwise, call an authorized
service.
Do not expose the product to direct sunlight
and do not store it in humid place.
Do not install the product where the
temperature drops below 10 °C.
Before you start the refrigerator,
Check the following before you start to use your
refrigerator:
Clean the interior of the refrigerator as
1.
recommended in the "Maintenance and
cleaning" section.
Connect the plug of the refrigerator to the wall
2.
socket. When the fridge door is opened, fridge
internal lamp will turn on.
When the compressor starts to operate, a sound
3.
will be heard. The liquid and gases sealed within
the refrigeration system may also give rise to
noise, even if the compressor is not running and
this is quite normal.
Front edges of the refrigerator may feel warm.
4.
This is normal. These areas are designed to be
warm to avoid condensation.
ELECTRICAL CONNECTION
AWARNING: Do not make connections to the
extension cords or multiple sockets.
Damaged power cable must be
AWARNING:
replaced by an Authorized Service.
When positioning the appliance,
AWARNING:
ensure the supply cord is not trapped or damaged
IKEA of Sweden will not be liable for any
damages that occur when the product is used
without grounding and electrical connections
that are according to national regulations.
The power cord plug must be easily accessible
after installation.
Connect your refrigerator to an outlet with
a ground line with 220-240V/50 Hz voltage.
Plugs should have a 10-16 A fuse.
CLIMATE CLASS AND DEFINITIONS
Please refer to the Climate Class on the rating plate
of your device. One of the following information is
applicable to your device according to the Climate
Class.
SN: Extended Temperate Climate: This
cooling device is designed for use at ambient
temperatures between 10 °C and 32 °C.
N: Temperate Climate: This cooling device is
designed for use at ambient temperatures
between 16°C and 32 °C.
ST: Subtropical Climate: This cooling device
is designed for use at ambient temperatures
between 16°C and 38°C.
T: Tropical Climate: This cooling device is designed
for use at ambient temperatures between 16°C
and 43°C.
8

Werbung

loading