Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Phone operation
The below table provides an overview of how to use the Phone Clip to control phone calls.
Note: Except for the answer and end call operations one or more of the below described
operations may be phone dependent, i.e. they may either differ slightly or be absent
altogether.
Question /
How to do it /
Also good to know
Answering and ending a call
Push the call answer/hang-up button once.
If another call is already active it will be terminated and the new incoming call, indicated by
clicking tones, will become active.
If another call is currently on hold it will become the active call.
Rejecting a call
Double-click the call answer/hang-up button.
If another call is already active it will remain active, only the new incoming call, indicated by
clicking tones, will be rejected
Transferring a call initiated on the mobile phone to Phone Clip
Push the call answer/hang-up button once.
Put an active call on hold
Press and hold the call answer/hang-up button for 2 seconds.
If another call is currently on hold or an incoming call is pending, it will now become the active
call.
Last number redial
Double-click the call answer/hang-up button while no call is active or pending.
If two mobile phones are connected, this operation applies to the most recently paired mobile
phone.
Voice dialling
Press and hold the call answer/hang-up button for 2 seconds
If two mobile phones are connected, this operation applies to the most recently paired mobile
phone.
This functionality requires that the voice dialling functionality is available and activated on
your Bluetooth phone.
Increase or decrease the volume of the speaker at the other end of the phone call
Push the + sign on the side of the Phone Clip to increase the volume.
Push the - sign on the side of the Phone Clip to decrease the volume.
Mute or unmute your sound processor(s) microphones during a phone call
Push the microphone mute/unmute button on the front of the Phone Clip**.
Remote Control operation**
If you have a Cochlear Baha Sound Processor, and are not making a call, the phone clip can be
used as a remote control for your sound processor(s).
Volume Control
Increasing the volume of your sound processor(s):**
Push the "+" sign on the volume control to increase the volume.
Decreasing the volume of your sound processor(s):**
•
Push the "-" sign on the volume control to decrease the volume.
•
Depending on the model, you can also utilize the volume control that is built into your
mobile phone.
Please note that if you have two sound processors, changing the volume will apply to both of
them**.
Mute or unmute the microphone(s) on your sound processor(s):**
•
To mute your sound processor microphones, push the microphone mute/unmute button on
the front of the phone clip once.
•
To unmute your sound processor microphones push the microphone mute/unmute button
on the front of the phone clip once.
Toggle through sound processor programs
Push the program button to toggle through available programs in your sound processor(s).
Operating time
Battery consumption and the operating time of your Phone Clip depend greatly on how the
device is used.
Your Phone Clip battery can be recharged hundreds of times. If the operating time becomes
noticeably shorter, please contact your hearing care professional.
All manuals and user guides at all-guides.com
Wearing your Phone Clip
Clip your Phone Clip on your clothing so that the microphone faces upwards. This ensures that
the microphones in the Phone Clip are placed optimally to pick up your voice during phone
calls.
The Phone Clip has a swivel clip to ensure that you can always place it so that the microphone
faces upwards towards your mouth.
For optimal voice pickup, keep the device within a range of 10- 30 cm from your mouth.
Light indicators (LED)
The LED at the top of your Phone Clip serves as a multipurpose user interface, providing
information on the status of your device.
Bluetooth Operating Range
Your phone clip supports Bluetooth
Line-of-sight between the devices is not required. However, the following factors may affect
the maximum range:
•
•
If your mobile phone moves out of range, the connection will be broken. If the device is moved
within range again, the Phone clip will attempt to re-establish the connection. Whether this
is successful will depend on the length of time since the link was broken and on the mobile
phone's properties.
Important Information
Maintenance and Care
•
•
•
•
General warnings
•
•
•
•
•
•
•
•
Ignition of flammable substances
Do not use the product in areas where it could ignite flammable gases.
LED blinking pattern /Meaning
Normal operation, green light
Battery low, yellow light
Charging, red light
Fully charged -still connected to charger, red and green light
Ready for pairing with hearing instrument(s), yellow light
Ready for pairing with Bluetooth device, blue light
Bluetooth call active, blue light
operation up to a range of approximately 10 metres.
®
Ambient interference
The mobile phone's range may be less than the 10 metres supported by the Phone Clip
Clean the Phone Clip using a damp cloth. Never use household cleaning products (washing
powder, soap, etc.) or alcohol to clean the device.
When the Phone Clip is not in use, turn it off and store it safely.
Protect the Phone Clip from excessive moisture (bathing, swimming) and heat (radiator, car
dashboard).
Protect it from excessive shock and vibration. Protect the microphone and charger sockets
from debris and dirt.
Keep this device out of reach of children.
The Phone Clip uses low-powered digitally coded transmissions in order to communicate
with other wireless devices. Although unlikely, nearby electronic devices may be affected. In
such cases, move the Cochlear Phone Clip away from the affected electronic device.
When using the Phone Clip and it is affected by electromagnetic interference, move away
from the source of the interference.
Avoid exposing your product to rain, moisture or other liquids to protect against damage to
the product or personal injury.
Keep the product and any cords and cables away from operating machinery.
If the product overheats, has been dropped or damaged, has a damaged cord or plug, or has
been dropped in a liquid, discontinue use and contact your hearing care professional.
Dispose of the product according to local standards and regulations.
Do not use in areas where there is a risk of explosion.
Werbung
