General Characteristics - Cembre B35-TFC Bedienungsanleitung

ENGLISH
BATTERY OPERATED HYDRAULIC CUTTING TOOL
B35-TFC ; B35-TFCA

1. GENERAL CHARACTERISTICS

TOOL TYPE:
Application range:
Rated operating pressure bar (psi):
Dimensions LxWxH
mm (inches):
Weight with battery kg (lbs):
Motor Volt DC:
Battery type CB9620H
Volt / Ah:
Battery charger supply Volt / Hz:
Recommended oil: AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
Safety:
the tool is equipped with a maximum pressure valve.
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L is equal to ............................................................................. 66,8 dB (A)
pA
– The maximum value of the weighted acoustic displacement
pressure C at the work place L is .....................................................................< 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine
L is equal to ............................................................................................................... 75 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1 Standards, and under operating conditions much more severe than those normally found,
st
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
The tool can be held in one hand while positioning the conductor with the other.
Residual battery energy level is automatically displayed after every cycle.
The part references "B35-TFC ; B35-TFCA" include the following:
– Basic tool complete with battery.
– Spare battery.
– Battery charger complete with CBA96-144 adapter.
– Plastic carrying case VAL P32.
B35-TFC B35-TFCA
suitable for cutting grooved contact wires and
conductors used on electric traction systems.
450 (6,500)
370 x 187 x 86 (14.6 x 7.4 x 3.4)
3,4 (7.5)
9.6
9.6 / 2.0 Ni-MH
220 - 240 / 50 - 60 120 / 50 - 60
-15°C to +40°C (+5°F to +104°F)
.
2
3 32