General Characteristics - Cembre RHC131LN Bedienungsanleitung

1. GENERAL CHARACTERISTICS

– Head: "C" shaped with large jaw opening.
– Application range: suitable for installing electrical compression connetors (lugs and splices) on
conductors up to ........................................................................................................ 400 mm
– Crimping force: ........................................................................................................... 130 kN
– Max operating pressure: ........................................................................................ 700 bar
– Oil necessary (displacement): ............................................................................... 80 cm
– Dimensions: length ................................................................................................... 298 mm
width ..................................................................................................... 122 mm
– Weight: ........................................................................................................................... 5,4 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
The head is equipped with a "self-lock" quick male coupler suitable for connection to a hydraulic,
pneumatic or electrical pump from the Cembre range.
For a given connector, select and install the appropriate die set (see § 3).
2.2) Die advancement
– Insert the conductor into the connector.
– Locate the connector between the dies at the desired crimp position.
– Operate the pump to advance the die.
N
EVER PRESSURIZE THE HEAD WITHOUT INSERTING THE DIES
HEAD AND THE RAM
Make sure the dies are exactly positioned on the desired crimp point, otherwise re-open dies following
instructions as per § 2.4 and reposition the connector.
2.3) Crimping
Operate the pump to advance the ram until the die faces touch.
It is recommended to continue pumping until the maximum pressure valve is activated and a
"click" is heard.
3
HYDRAULIC PRESS HEAD
RHC131LN
(Ref. to Fig. 1)
.
2
3
,
THIS COULD CAUSE DAMAGE TO THE
ENGLISH
(800 MCM)
(14.6 sh ton)
(10,000 psi)
(4.9 cu. in)
(11.7 in.)
( 4.9 in.)
(11.9 lbs)