Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning of milk foam system
1.
After the fancy coffee is made or the milk foam is produced, the indicator light
of "Clean/Descale" button remains on to remind users to clean the milk foam
system. Put a cup of suitable size (200 ml) at the coffee outlet, align the milk
foam generator with the lip of the cup, rotate the milk foam adjustment knob
to the large milk foam position, and press the "Clean/Descale" button once.
Then, the coffee machine will enter the cleaning mode of milk foam system.
At this time, the indicator light of "Clean/Descale" button will start to flash and
automatically stop after about 30 seconds.
2.
Operating any function button is invalid during cleaning.
Warning: Danger of scalding
The milk foam generator produces a lot of hot water and steam
during the cleaning process. Please add pure water to the milk tank
when the function is activated.
Foaming milk
1.
Put a cup (200 ml) with a suitable size at the coffee outlet during foaming milk.
Turn the knob of the milk foam generator to align the milk foam generator
with the lip of the cup, and turn the adjustable knob of the milk foam
generator to the appropriate position.
2.
Press and hold the "Froth/Cappuccino" button for more than 3 seconds. At this
time, the indicator light of "Froth/Cappuccino" button starts to flash, with the
buzzer "beeping" once, while the indicator lights of other coffee functions will
be half lit, and the milk foam generator emits milk foam. When the desired
amount is reached, you can press the "Froth/Cappuccino" button again to stop
making milk foam.
3.
If there is no operation during making milk foam, it will automatically stop
working after about 30 seconds. (The coffee machine has a flowmeter and the
time will be slightly different every time)
Energy saving mode
1.
If there is no operation after the coffee machine finishes working, it will enter
standby mode after about 29 minutes with all the indicator lights going out.
2.
If the coffee machine is in standby mode, the product will restore the
preheating state by press any button.
Protection
1.
If the NTC fails (such as short circuit, open circuit, etc.) at any time, the
machine must enter the protection state. If the NTC for measuring the coffee
temperature fails, the indicator lights of "Espresso" in small cup and large cup
will continue to flash. If the NTC for measuring the temperature of the milk
foam fails, the indicator lights of "Froth/Cappuccino" in small cup and large
cup, as well as the indicator lights of "Latte" in small cup and large cup will
EN
41
Werbung
