Silvercrest SDBS 2400 A1 Kurzanleitung Seite 14

Vertical steam ironing
1) Hang the fabric to be ironed on a clothes hanger which is hung against
a heat-resistant surface .
2) Rotate the temperature control 2 to set the required ironing temperature .
The temperature control 2 must be set to a minimum of
steam .
3) Wait until the heat-up indicator lamp 3 goes out .
4) Press the steam strength button z
–
If the "max" steam indicator lamp w is lit up, a lot of steam will be
produced .
–
If the "eco" indicator lamp q is lit up, less steam will be produced .
As soon as the "eco" q or "max" w indicator lamps light up continuously
(depending on the setting) you can start steam ironing .
5) Hold the steam iron in a vertical position and press the steam button 1 .
6) Touch the fabric lightly with the sole of the iron 6 and steam it to remove
creases .
7) Release the steam button 1 to stop producing steam .
Disposal
Disposal of the appliance
Never dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU WEEE (Waste Electrical and Electronic Equipment) .
Dispose of the appliance via an approved disposal company or your municipal
waste facility . Please comply with all applicable regulations . Please contact your
waste disposal centre if you are in any doubt .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
The product is recyclable, subject to extended producer responsibility and is
collected separately .
SDBS 2400 A1
to set the required steam strength:
GB │ IE
to produce
11 ■
│