Silvercrest SDBS 2400 A1 Kurzanleitung Seite 13

5) Press the On/Off button t to turn the appliance off . The indicator lamp
integrated in the On/Off button t and the "max" steam indicator lamp w
go out .
6) Pull out the plug from the mains socket .
Steam ironing
1) Press the On/Off button t to turn the appliance on . The indicator lamp
integrated in the On/Off button t lights up and the "max" steam indicator
lamp w flashes .
2) Turn the temperature control 2 to set the required ironing temperature . The
temperature control 2 must be set to a minimum of
3) The heat-up indicator lamp 3 lights up during heating . As soon as the heat-
up indicator lamp 3 goes out, the set temperature has been reached .
4) Press the steam strength z
–
If the "max" steam indicator lamp w is lit up, a lot of steam will be
produced .
–
If the "eco" indicator lamp q is lit up, less steam will be produced .
As soon as the "eco" q or "max" w indicator lamps light up continuously
(depending on the setting) you can start steam ironing .
5) While you are ironing, you can now press and hold the steam button 1 to
continuously spray steam onto the goods to be ironed from the sole of the
iron 6 . Release the steam button 1 to stop producing steam .
NOTE
► When you press the steam button 1, it can take a few seconds until steam
is issued from the sole of the iron 6 .
6) Put the iron down on the base station placement area 5 after ironing .
Set the temperature control 2 to "min" .
7) Press the On/Off button t to turn the appliance off . The indicator lamp
integrated in the On/Off button t and the "eco" q or "max" w steam
indicator lamps (depending on setting) will go out .
8) Disconnect the plug from the mains socket .
■ 10 │ GB │ IE
button to set the required steam strength:
to produce steam .
SDBS 2400 A1