Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
m
WARNING! RISK OF INJURIES!
Always wear protective gloves when
working with the product and employ
only original parts. Always switch
the product off, disconnect it from
the mains and let the product cool
down before performing inspection,
maintenance and cleaning work!
Adjusting the auxiliary
handle
(Fig. B)
NOTE
The product shall only be operated with
the auxiliary handle 6 fitted.
Disconnect the power plug 5 from the
socket-outlet.
Loosen the auxiliary handle knob 7 .
Move the auxiliary handle 6 forward/
backward and left/right.
When you have set the optimal position,
tighten the auxiliary handle knob 7 .
Inserting/removing the chisel
(Fig. C)
m
WARNING! RISK OF INJURY!
Hold the product securely when inserting/
removing the chisel 12 13.
The chisel 12 13 can become very hot
during operation. Allow the chisel to cool
down. Wear gloves when removing the
chisel.
Disconnect the power plug 5 from the
socket-outlet.
Clean the chisel 12 13 (see "Cleaning").
Apply a thin layer of grease 14 to the part
of the chisel 12 13 that is inserted into the
chisel holder 11.
Place the product on a stable, flat surface.
Inserting: Pull the locking collar 9 back
with one hand. Insert the chisel 12 13 into
the chisel holder 11. The chisel must click
audibly into place.
Removing: Pull the locking collar 9 back
with one hand. Pull out the chisel 12 13 with
the other hand.
Adjusting the flat chisel
position
(Fig. D)
m
WARNING! RISK OF INJURY!
Hold the product securely when adjusting
the position of the flat chisel 12.
The flat chisel 12 can become very hot
during operation. Allow the flat chisel to
cool down. Wear gloves when adjusting
the flat chisel position.
Disconnect the plug 5 from the socket-
outlet.
Place the product on a stable, flat surface.
Push the adjustment collar 8 forward with
one hand. Turn the adjustment collar to the
desired position.
Release the adjustment collar 8 to secure
the flat chisel 12 in its position.
GB/IE
27
Werbung
